Cisco D9854 Installation And Configuration Guide

Chapter 6 Service and Maintenance
308
Alarm
Message
Type
Message
Cause/Remedy
Description
Severity
ID
Signal Status
Set
RF Signal - No
Content
Cause: Loss of
ASI/RF lock. Loss
of Transport data.
Invalid frequency
parameters.
External to IRD.
Remedy: Check
tuning parameters
and ASI/RF
cables.
RF Tuner
locked, but no
TS content.
Minor
1000
Signal Status
Set
Signal is lost
Cause: Loss of
ASI/RF lock. Loss
of Transport data.
Invalid frequency
parameters.
External to IRD.
Remedy: Check
tuning parameters
and ASI/RF
cables.
Loss of signal.
Minor
1000
Signal Status
Set
Tuning
Parameters
Invalid
Cause: Loss of
ASI/RF lock. Loss
of Transport data.
Invalid frequency
parameters.
External to IRD.
Remedy: Check
tuning parameters
and ASI/RF
cables.
One of the
tuning
parameters is
invalid.
Minor
1000
Signal Status
Clear
Signal is locked
–
Signal OK
Minor
1000
Signal Status
Clear
Tuning
Parameters Valid
–
Tuning
parameters are
valid
Minor
1000

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C