Cisco D9854 Installation And Configuration Guide

351
Warning
Message
Type
Message
Cause/Remedy
Description
ID
TDT timeout #
Set
TDT is lost
Cause: Uplink is not
sending or is sending
intermittently.
Remedy: Clear warning.
If the problem persists,
determine if uplink is
sending the current SI
information table.
Disable the warning if
not using the table.
No longer receiving
Time Date.
50000
TDT timeout #
Clear
TDT fault cleared
–
–
50000
SDT timeout #
Set
SDT # timed out
Cause: Uplink is not
sending or is sending
intermittently.
Remedy: Clear warning.
If the problem persists,
determine if uplink is
sending the current SI
information table.
Disable the warning if
not using the table.
Service Description
Table was never
received.
51000
52000
53000
54000
55000
56000
57000
58000
SDT timeout #
Set
SDT # is lost
Cause: Uplink is not
sending or is sending
intermittently.
Remedy: Clear warning.
If the problem persists,
determine if uplink is
sending the current SI
information table.
Disable the warning if
not using the table.
No longer receiving
Service Description.
51000
52000
53000
54000
55000
56000
57000
58000
SDT timeout #
Clear
SDT fault cleared
–
–
51000
52000
53000
54000
55000
56000
57000
58000

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C