Cisco D9854 Installation And Configuration Guide

Chapter 6 Service and Maintenance
352
Warning
Message
Type
Message
Cause/Remedy
Description
ID
PMT timeout #
Set
PMT # timed out
Cause: Uplink is not
sending or is sending
intermittently.
Remedy: Clear warning.
If the problem persists,
determine if uplink is
sending the current SI
information table.
Disable the warning if
not using the table.
Program Mapping
Table was never
received.
59000
60000
61000
62000
63000
64000
65000
66000
66009-66032
PMT timeout #
Set
PMT # is lost
Cause: Uplink is not
sending or is sending
intermittently.
Remedy: Clear warning.
If the problem persists,
determine if uplink is
sending the current SI
information table.
Disable the warning if
not using the table.
No longer receiving
Program Mapping
Table.
59000
60000
61000
62000
63000
64000
65000
66000
66009-66032
PMT timeout #
Clear
PMT fault cleared
–
–
59000
60000
61000
62000
63000
64000
65000
66000
66009-66032
PAT timeout #
Set
PAT # timed out
Cause: Uplink is not
sending or is sending
intermittently.
Remedy: Clear warning.
If the problem persists,
determine if uplink is
sending the current SI
information table.
Disable the warning if
not using the table.
Program Association
Table was never
received.
67000
68000
69000
70000
71000
72000
73000
74000

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C