Cisco D9854 Installation And Configuration Guide

Chapter 6 Service and Maintenance
356
Warning
Message
Type
Message
Cause/Remedy
Description
ID
Memory Usage
Host
Set
Excessive
(stack/partition)
memory usage
Cause: Possible software
issue.
Remedy: Clear
warnings, reset the unit,
and notify Cisco
Services if the problem
persists.
SW exceeding
allowable memory
usage.
78000
Memory Usage
Host
Clear
Normal
(stack/partition)
memory usage
–
–
78000
Memory Usage
Secondary
Set
Excessive
(stack/partition)
memory usage
Cause: Possible software
issue.
Remedy: Clear
warnings, reset the unit,
and notify Cisco
Services if the problem
persists.
Software exceeding
allowable memory
usage.
79000
Memory Usage
Secondary
Clear
Normal
(stack/partition)
memory usage
–
–
79000
FPGA Code
Version
Set
FPGA newer
than SW,
Supported=AAA,
Running=BBB
Cause: FPGA version is
incompatible with the
software.
Remedy: Select alternate
FPGA, software
versions, reset unit,
notify Cisco Services if
problem persists.
FPGA version is
incompatible with
currently operating
software. You may
encounter operational
difficulties
80000
FPGA Code
Version
Clear
FPGA code ver
OK
–
–
80000

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C