Cisco D9854 Installation And Configuration Guide

357
Warning
Message
Type
Message
Cause/Remedy
Description
ID
Link Status
Set
<Port Name>
Link is down
Cause: No Ethernet
cable connected, faulty
cabling, multiple devices
sharing MAC address
on same IP segment, or
possible hardware issue.
Remedy: Check cabling,
ensure that all Ethernet
ports are connected to
the external devices, or
disable faults for ports
that are not in use, and
notify Cisco Services if
the problem persists.
Ethernet MAC PHY
device has failed to
connect to external
devices.
81000
82000
83000
84000
Link Status
Clear
<Port Name>
Connection OK
–
–
81000
82000
83000
84000
FW: Resource
Use Host
Set
Memory or List
Near Full
Cause: Possible software
issue.
Remedy: Clear
warnings, reset the unit,
and notify Cisco
Services if the problem
persists.
Software exceeding
allowable usage of
internal constructs.
86000
FW: Resource
Use Host
Clear
Normal Level
–
–
86000
FW: Resource
Use Second
Set
Memory or List
Near Full
Cause: Possible software
issue.
Remedy: Clear
warnings, reset the unit,
and notify Cisco
Services if the problem
persists.
Software exceeding
allowable usage of
internal constructs.
87000
FW: Resource
Use Second
Clear
Normal Level
–
–
87000

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C