Cisco D9854 Installation And Configuration Guide

Chapter 6 Service and Maintenance
358
Warning
Message
Type
Message
Cause/Remedy
Description
ID
Backup Failure
Reason
Set
FTP Failed
Cause: FTP settings or
the server may not be
configured correctly.
Remedy: Verify the FTP
server configuration and
permissions, the FTP
settings on the unit, and
that the server is
reachable from the client
(such as configuring
firewalls or network
settings). Retry the
Backup operation.
FTP failed to connect
to server or transfer
file.
89000
Backup Failure
Reason
Set
Internal Error
Cause: Possible software
issue.
Remedy: Clear
warnings, reset unit,
notify Cisco Services if
the problem persists
Backup ran out of
memory or other
internal error
89000
Restore Failure
Reason
Set
FTP Failed
Cause: FTP settings or
the server may not be
configured correctly.
Remedy: Verify the FTP
server configuration and
permissions, the FTP
settings on the unit, and
that the server is
reachable from the client
(such as configuring
firewalls or network
settings). Retry the
Import operation.
FTP failed to connect
to server or transfer
file
89000

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C