4-68
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
OL-31085-01
Chapter 4 Setup and Monitoring via On-Screen Display
Setup Menu
Press the blue button (Clear) to clear the total numbers above. To help the operator make accurate
analysis of the receiver’s functionality, the ADP(ENC) and ADP(NON) numbers should be cleared.
These same values are also reset whenever the receiver is turned on, reset, or power-cycled.
ADP(NON) Passed Indicates the current Non-Encrypted Addressed Data Packet count.
This count indicates the amount of transmitted ADP information
being accurately received and processed. Ideally, the ADP(NON)
Passed and ADP(NON) Total Received numbers should be
identical.
ADP(NON) Total Received Indicates the total Non-Encrypted Addressed Data Packet count.
This count indicates the amount of transmitted ADP information
being accurately received and processed. Ideally, the ADP(NON)
Passed and ADP(NON) Total Received numbers should be
identical.
ADP Status Description
To Next Page
Loading...
