Cisco D9865 Installation And Configuration Guide

4-57
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
OL-31085-01
Chapter 4 Setup and Monitoring via On-Screen Display
Setup Menu
Viewing System Information
Proceed as follows to view the System Information screen.
From the Setup Menu screen, select Info and press OK.
The function for the available sub-menus is as follows:
• Version
– This menu displays the current and factory loaded application version numbers.
• Hardware
– From this menu, it provides the D9865 receiver’s hardware information.
• Service
– This menu displays the channel service information.
• Channel
– This menu displays the current channel information.
• DVB-CI
– This menu displays the CAM (Conditional Access Module) Smart Card information for the CI
(Common Interface) slot.
• Device Status
– This menu displays the status of the D9865 receiver.
• Active Alarm
– This menu lists all the active alarm messages.
• Active Warning
– This menu lists all the active warning messages.
• RF Status
– From this menu, it displays the RF input status.
• ADP Status
– This menu displays the Encrypted and Non-encrypted Addressed Data Packet Count
information.

Cisco D9865 Specifications

General

Brand	Cisco
Model	D9865
Category	Receiver
Language	English