5-34
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
OL-31085-01
Chapter 5 Setup and Monitoring via Web GUI
Viewing System Information
Step 8 Click Apply.
Viewing System Information
Proceed as follows to view the Identification page:
From the user interface of the D9865, choose System Settings > System> Identification. The
Identification page is displayed.
The Identification page displays the parameters associated with the D9865 system, such as model
number, customer code, and user address. The following table displays the system information:
Identity Information Description
Model Number Indicates the model number of the receiver.
Model Name Indicates the model name of the receiver.
Catalogue Number Indicates the catalogue number of the receiver.
Customer Code Indicates the unique customer code assigned to an organization by
Cisco.
Serial Number Indicates the unique serial number of the receiver.
Tracking ID This is the unique Tracking ID number that identifies the product
version.
User Address Indicates the user addresses assigned to the receiver.
Ethernet 1 (Control) MAC
Address (D9865D only)
Indicates the MAC addresses assigned to the Ethernet interface at
the time of manufacture.