4-12
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
OL-31085-01
Chapter 4 Setup and Monitoring via On-Screen Display
Setting Up One Button Channel Change
Deleting a Favorite Profile
Note Only Favorites that are marked with a circle can be deleted.
Step 1 From the Favorite screen, scroll to the Favorite profile you want to delete using the buttons.
Step 2 Press the yellow button (Edit). The Edit/Delete Custom Favorite screen is displayed.
Step 3 Select Delete or press the red button (Delete). A warning message appears confirming your deletion.
Step 4 Press OK to confirm.
Performing a Channel Scan
The Channel Scan function scans through all the available channels and updates the Authorized
Channels Only list. For more information on your authorized channels, contact your uplink service
provider.
Proceed as follows to perform a channel scan:
Step 1 From the Favorite screen, press the red button (Chnl Scan). A warning message appears confirming the
channel scan. It can take several minutes, depending on the size of the network.
Step 2 Press OK. The Authorized Channels Only list is updated.
Setting Up One Button Channel Change
Proceed as follows to set up one button channel change:
From the Main Menu, select One Button Channel Change and press OK.
The Button colors (Red, Green, Yellow, and Blue) corresponds to the colored buttons at the bottom of
the remote control (see below).
To Next Page
Loading...
Need help?
General
