Cisco D9865 Installation And Configuration Guide

B-8
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
OL-31085-01
Appendix B Default Settings
Factory Default Settings
Unicast IP Setup
By default, the Unicast routes list is empty.
Multicast IP Setup
By default, the Multicast routes list is empty.
Trap Destination Setup
SNMP
Noise Cutoffs
Parameter Default
Voltage Range 100 V to 240 V AC
Line Frequency 50/60 Hz
Power Consumption 35 W max.
LNB Power on satellite input +13 V/+ 18 V @ 350 mA max.
Parameter Default
Read Community String public
Write Community String public
System Name (Web GUI only) sysname
System Location (Web GUI only) Toronto
System Contact (Web GUI only) 416-321-XXXX
Parameter Default
Noise Cutoffs Enable
DVB-S/DVB-S2 TS Cut Off 0.0 dB
DVB-S/DVB-S2 TS Restore 0.1 dB
DVB-S/DVB-S2 Audio Cut Off 0.0 dB
DVB-S/DVB-S2 Audio Restore 0.1 dB

Cisco D9865 Specifications

General

Brand	Cisco
Model	D9865
Category	Receiver
Language	English