5-6
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
OL-31085-01
Chapter 5 Setup and Monitoring via Web GUI
Overview of the Main D9865 Settings
D9865 Web GUI Environment
The following is an example of a D9865 Web GUI page.
The Window Buttons
The GUI of the D9865 has the following general buttons:
Indicates a mandatory field.
Icons
Buttons
Links
Displays as you edit the page. Chang-
es are applied on the receiver only
(not on the uplink).
Click Apply to save the changes.
Button Description
Apply Saves and applies the settings to the receiver.
If you make changes on a web page, ensure that you apply the
changes before moving to another page. If you move to another page
without saving your (edits) changes, the web GUI will revert to the
previously saved settings, and the changes will be lost. Also, ensure
that you save all changes on a web page before leaving your PC;
otherwise, the GUI will eventually time out and revert back to the
previously saved settings.
Refresh Reads existing data from the D9865. If edits were made in a setup
page, then unsaved changes are discarded.
To Next Page
Loading...
Need help?
General
