5-46
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
OL-31085-01
Chapter 5 Setup and Monitoring via Web GUI
Viewing Version Information
Viewing Version Information
Proceed as follows to view the Version information:
From the user interface of the D9865, choose System Settings > Ver s i ons. The Versions page is
displayed.
The Versions page displays the following information:
The S/W Version drop-down list allows you to choose a different application version application to load
to your receiver. Choose Select and Reboot to reboot the receiver and load the selected application
version.
Click Erase to remove the selected application version. You will be prompted to continue or not. Press
OK to continue the deletion.
To Change the Download Application
In the Download APP area, click Browse to select the new version of the D9865 Satellite Receiver’s
software application. The Choose File dialog opens. Select the upgrade file and click Open. Click
Download to download the selected upgrade file.
Version Information Description
Current Application Version Indicates the currently running loaded application version number.
Safe Application Version Indicates the factory loaded application version number.
Minimum Compatible Version Indicates the minimum application version you can download.
Boot Version Indicates the receiver Boot application version number.
FPPIC Version Indicates the Programmable Interrupt Controller (PIC) version
number.
To Next Page
Loading...
Need help?
General
