CHAPTER
5-1
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
OL-31085-01
5
Setup and Monitoring via Web GUI
This chapter describes how to set up and monitor the D9865 Satellite Receiver using the web GUI. This
chapter presents the following major topics:
• Logging on to the Web GUI, page 5-2
• Overview of the Main D9865 Settings, page 5-3
• Setting up Tuning Information, page 5-8
• Setting Up Dish Pointing, page 5-10
• Setting up the Tuning Presets/LNB, page 5-17
• Viewing Input Status, page 5-20
• Setting the Channel Information, page 5-21
• Configuring the Common Interface (CI) Information, page 5-22
• Viewing the PSI Tables, page 5-25
• Viewing PSI Frequency Information, page 5-26
• Viewing the PSI Channels, page 5-28
• Setting up the Video, page 5-29
• Viewing System Information, page 5-34
• Setting Up IP Information, page 5-36
• Configuring Time/Clock Information, page 5-39
• Configuring Favorites and Reminders, page 5-40
• Viewing the Alarm/Warning Status, page 5-42
• Viewing the Alarm/Warning History, page 5-45
• Viewing Version Information, page 5-46
• Setting Up Import/Export Information, page 5-47
• Viewing the Backup/Restore History, page 5-48
• Managing D9865 Web GUI Accounts, page 5-49
• Configuring Lock Level Settings, page 5-52
• Viewing Contact Information, page 5-54
• Viewing Diagnostic Logs, page 5-54
• Viewing the Usage Counters, page 5-55
To Next Page
Loading...
Need help?
General
