Cisco D9865 Installation And Configuration Guide

5-13
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
OL-31085-01
Chapter 5 Setup and Monitoring via Web GUI
Setting Up Dish Pointing
Setting up SI Receive Parameters
Proceed as follows to setup the SI Receive parameters:
Step 1 From the user interface of the D9865, choose Input > Satellite > Tuning Setup > SI Receive Setup.
The SI Receive Setup page is displayed.
Step 2 From the Acquisition Mode drop-down list, select the mode used to build channel lists from allowed
service lists. The selections are Auto, Basic, or Custom. The default is Basic.
If you choose Custom, click Configure Custom SI Recv and the Configure Custom SI Recv window
opens:
Step 3 From the Frequency Tuning Mode drop-down list, choose whether the receiver is to be tuned to the
received signal using the NIT or User Cfg (user configurations).

Cisco D9865 Specifications

General

Brand	Cisco
Model	D9865
Category	Receiver
Language	English