5-48
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
OL-31085-01
Chapter 5 Setup and Monitoring via Web GUI
Viewing the Backup/Restore History
Note The FTP Password is not retained in the receiver. You must re-enter the password before
initiating the backup or restore operation.
Step 9 In the FTP Port Number field, enter the port number of the FTP server used to store the backup/restore
file. You can enter a port number in the range from 1 to 65535.
Step 10 Click the Export Device Settings & Transport Network Information or Export User Device Settings
Only radio button.
Step 11 Click Export to save the settings to a backup file. Click Import to retrieve the last backed up file.
Viewing the Backup/Restore History
Proceed as follows to view the backup and restore Status page:
From the user interface of the D9865, choose System Settings > Settings File > Status. The Status page
is displayed.
The following table shows the Backup History, Restore History, and Operation History table
information:
Status Description
Last Backup File Name Name of the file that was successfully exported.
Backup Timestamp Date and time of the last successful backup file saved.
Last Restored File Name Name of the last file that was successfully restored.
Restore Time Stamp Date and time of the last successful restore.
Operation Status Status of the current backup operation (Inprogress, Pass, or Fail).
Detailed Operation Status Detailed processing step for tracking backup progress.
Percentage Completed Percentage of backup function completed.
To Next Page
Loading...
Need help?
General
