4-60
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
OL-31085-01
Chapter 4 Setup and Monitoring via On-Screen Display
Setup Menu
The Service Information screen displays the PIDs associated with a selected channel.
About Subscriber Services
Subscriber uplink services made available to your satellite receiver are associated with virtual channels.
These channels can include video, audio, and/or data services. All authorized virtual channel services
are provided via PowerVu Network Centre (PNC) system software and broadcast facility equipment, and
are decoded by the receiver. You can view available subscriber services for any received virtual received
channel on this menu and tune to the selected channel by entering the particular Channel Number.
About the Current Channel
When you navigate to menus from video, the information displayed is associated with the current (video)
channel. If no changes have been made to the current setup, you can automatically return to the same
channel when you exit to video.
Viewing Channel Information
Proceed as follows to view the Channel Information screen:
From the Info screen, select Channel Information and press OK.
To Next Page
Loading...
Need help?
General
