5-28
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
OL-31085-01
Chapter 5 Setup and Monitoring via Web GUI
Viewing the PSI Channels
Viewing the PSI Channels
Proceed as follows to view the PSI Channels table:
From the user interface of the D9865, choose Input > Stream Details > PSI Channel. The PSI Channel
page is displayed.
The PSI Channel table is read-only. The following is a list of the various columns:
Abbreviation Description
Service ID Virtual Channel
TS ID Transport Stream ID
Program Name Name of the program
PMT PID Program Map Table PID
ECM PID Entitlement Control Message PID