5-55
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
OL-31085-01
Chapter 5 Setup and Monitoring via Web GUI
Viewing the Usage Counters
The Diagnostic Logs page displays all the system log messages with their dates and times.
Click on the arrow next to Set Date and Time column to sort by date and time.
Viewing the Usage Counters
Proceed as follows to view the usage counters:
From the user interface of the D9865, choose Support > Logs > Usage Counters. The Usage Counters
page is displayed.
The following table describes the Usage Counter information:
Click Clear Reset Counter to clear the Clearable Reset Counter field and it resets the counter back to
0.
Device Status Information Description
Production Date & Time Displays the date and time when the receiver was manufactured.
Last Power On Date and Time Displays the date and time when the receiver was powered up.
Lifetime Hours Powered Displays the number of hours since the last power-on.
Lifetime Reset Counter Displays the total number of times the receiver has been restarted.
Clearable Reset Counter Displays the number of restarts since the last time the restart counter
was cleared.
To clear or reset the Clearable Reset Count, click Clear.
Hours Since Last
Powered-On/Reset
Displays the total number of hours that the receiver has been
operating since the last power-on or restart.
Last Reset Reason Displays the reason for the last restart, i.e., power cycle or manual
reset.
To Next Page
Loading...
Need help?
General
