Cisco D9865 - Setting Up ImportExport Information

B-1
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
OL-31085-01
APPENDIX
B
Default Settings
This appendix contains the factory default settings for the D9865 Satellite Receiver. The D9865 Satellite
Receiver is factory configured with default settings unless you have requested a custom factory
configuration.
Factory Default Settings
Tuning/Preset
Parameter Default
Modulation Type DVB-S2
Downlink 12.3 GHz
Symbol Rate 30.0 MS/s
Net Id 1
LO Select Off
LO Freq 1 10.75 GHz
LO Freq 2 0.0 GHz
Crossover 0.0 GHz
LNB Power 18V
DiSEqC Disable
DiSEqC Switch Off
Roll Off Factor (Web-GUI only) .35
I/Q (Web GUI only) Auto