4-45
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
OL-31085-01
Chapter 4 Setup and Monitoring via On-Screen Display
Setup Menu
Setting the Unicast IP Address
Viewing the Unicast IP
Unicast transmission is used to send messages to a specific address. You can specify up to six single
network destinations. The Gateway address is necessary if the network address is not on a local network.
Proceed as follows to view the Unicast IP addresses:
From the Network Setup screen, select Unicast IP Setup and click OK.
The Unicast IP Setup screen lists all the IP addresses and its Gateway addresses that are participating in
a Network environment.
Adding a Unicast IP Address
Proceed as follows to add a Unicast IP Address:
Step 1 From the Unicast IP Setup screen, press the green button (Add) to add a new address.
Step 2 Make the necessary changes. The following table describes each of the options:
To Next Page
Loading...
