Cisco D9865 Installation And Configuration Guide

4-53
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
OL-31085-01
Chapter 4 Setup and Monitoring via On-Screen Display
Setup Menu
Figure 4-3 Audio Default C/N Margin Relationship
Step 4 If you want to restore the transport stream and audio C/N margin options to their factory set (default)
values, press the blue button (Default). A message appears confirming to restore to default values. Press
OK to confirm.
Step 5 Press the green button (Save) to save and apply the settings to the receiver.
Setting up Alarms and Warnings
Proceed as follows to set up the alarms and warnings:
Step 1 From the Advanced Setup screen, select Alarms & Warnings and press OK.
Step 2 Set whether alarms and warnings are to be displayed on-screen in AW Banner (Enable or Disable).
Note The alarms and warnings will only appear on-screen if the screen is displaying video only. The
AW Banner will not appear if EPG, Channel Banner or on-screen menus are displayed.
Step 3 The Active Alarms displays the number of currently active Alarms, and the Active Warnings indicates
the number of currently active Warnings.
Audio Mute
Audio Restore
0.1
0.0
Audio Muted
Audio Restored
Audio
C/N Margin

Cisco D9865 Specifications

General

Brand	Cisco
Model	D9865
Category	Receiver
Language	English