5-47
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
OL-31085-01
Chapter 5 Setup and Monitoring via Web GUI
Setting Up Import/Export Information
Viewing Hardware Information
The Hardware Versions area displays the hardware information of the D9865 Satellite Receiver.
Setting Up Import/Export Information
Proceed as follows to configure the import/export information:
Step 1 From the user interface of the D9865, choose System Settings > Settings File > Import/Export. The
Import/Export page is displayed.
In the Device Settings File Transfer area, you can export and/or import device settings and transport
network information.
Step 2 Click the Export Device Settings & Transport Network Information radio button and click Export
to download device settings and transport network information as a file to the designated file folder.
Step 3 Click the Export User Device Settings Only radio button and click Export to download user settings
as a file to the designated file folder.
Step 4 In the Settings File field, click Browse. The Choose File dialog opens.
Step 5 Navigate to the appropriate folder and select the file with a .bkp file extension and click Open.
The Configure Offline FTP Settings File Transfer section has backup and restore controls.
Step 6 In the Settings Filename field, enter the filename of the backup/restore file. You can enter up to 31
characters.
Step 7 In the FTP Server IP Address field, enter the IP address of the FTP server used to restore the
backup/restore file.
Step 8 In the FTP User Name and FTP Password fields, enter the username and password used to access the
FTP server.
To Next Page
Loading...
Need help?
General
