4-56
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
OL-31085-01
Chapter 4 Setup and Monitoring via On-Screen Display
Setup Menu
Step 4 Press the green button (Restart DL) to force an over-the-air download. You can press the red button
(Abort DL) at any time to abort the download operation. Once the download is complete, the receiver
reboots. Following reboot, the receiver returns to the last viewed channels.
Setting Bootable Application Selection
To View Application Version numbers
Proceed as follows to view the application version numbers:
From the Download screen, press the yellow button (Boot App).
The Current App Version displays the currently running loaded application version number. The Safe
App Version displays the factory loaded application version number.
To Change the Download Application
The Download App field allows you to select a different application version application to load to your
receiver. Press the green button (Load App) to load the selected application version and reboot the
receiver.
Press the blue button (Safe App) to reboot the receiver and load the factory installed application version.
Press the red button (Delete) to remove the selected application version. You will be prompted to
continue or not. Press OK to continue the deletion.
To Next Page
Loading...
Need help?
General
