Cisco D9865 Installation And Configuration Guide

4-19
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
OL-31085-01
Chapter 4 Setup and Monitoring via On-Screen Display
Setup Menu
Editing Network Presets
You can edit or pre-configure any one of 64 presets without affecting the operation of the receiver.
To save or change a network preset:
Step 1 Enter a Preset Number and a name directly to below the Preset Number. Follow the editing rules for the
keys when entering characters in the Name field.
Step 2 Enter the appropriate settings as described in the preceding table. Ensure that the LNB selection
corresponds to the correct downlink frequency.
Step 3 Press OK to save the preset.
Setting up LNB
Proceed as follows to set up the LNB:
Step 1 From the Preset/LNB Setup menu, press the yellow button (LNB) to set up the LNB.
Note You can configure up to 10 LNB presets.
Step 2 The following table describes each of the options:
Selection Options Description
LNB Configuration 1 to 10 Number identifying the current preset LNB
configuration.

Cisco D9865 Specifications

General

Brand	Cisco
Model	D9865
Category	Receiver
Language	English