4-35
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
OL-31085-01
Chapter 4 Setup and Monitoring via On-Screen Display
Setup Menu
Viewing Advanced Settings
Proceed as follows to view the Advanced Setup screen.
From the Setup Menu screen, select Advanced Setup and press OK.
The function for the available sub-menus is as follows:
• Administration
–
From this menu, you can display and control the Lock level, date and time, and other settings.
• Network Setup (D9865D only)
–
From this menu, you can configure the receiver for Ethernet operation.
• Noise Cutoffs
–
From this menu, you can set the noise thresholds.
• Alarms & Warnings
–
From this menu, you can configure alarm and warning settings.
• Download
–
From this menu, you can control and view the status of a code download.
Dolby Digital
Plus (>= 1.5
Mbps)
PCM Dolby Digital (follows
IEC 61937)
Dolby Digital (follows
IEC 61937)
Dolby Digital
(follows IEC
61937)
MPEG2 AAC,
MPEG4 (AAC
and HEAAC v1
and v2)
PCM MPEG2 AAC, MPEG4
(AAC and HEAAC)
(follows IEC 61937)
MPEG2 AAC, MPEG4
(AAC and HEAAC)
(follows IEC 61937)
MPEG2 AAC,
MPEG4 (AAC
and HEAAC)
(follows IEC
61937)
Input/Output
Digital Audio Preference
PCM Dolby Digital
Compressed
S/PDIF HDMI