Cisco D9865 Installation And Configuration Guide

5-4
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
OL-31085-01
Chapter 5 Setup and Monitoring via Web GUI
Overview of the Main D9865 Settings
The following table describes the all the available modules:
Module Description
Decoded Program Status Displays channel and service information.
Audio Status Displays the current audio status information, such as the audio
format and sampling frequency.
Current Input Status Displays the current RF Tuning Status information, including the
downlink frequency and signal status.
Tuner Performance Displays the satellite dish status, such as the C/N Margin and Signal
Level.
Video Status Displays the current video information.
Channel Status Displays the channel status information, such as the type of CA used
and whether the receiver is authorized to receive the signal.
PID Information Displays the PIDs associated with the channels.
CI Status Displays the CAM card information.
Fault Active List Displays the currently active alarms and warnings.

Cisco D9865 Specifications

General

Brand	Cisco
Model	D9865
Category	Receiver
Language	English