Cisco D9865 Installation And Configuration Guide

4-8
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
OL-31085-01
Chapter 4 Setup and Monitoring via On-Screen Display
Introducing EPG
Step 2 Select an upcoming program you want to set a reminder by scrolling through the guide using the
 buttons and then press OK. The Extended Info screen is displayed with the channel name,
information and program time.
Step 3 If the program selected has already started, press Next  to set a timer for the next time slot.
Step 4 Press the green button (Set Timer). The Set Timer screen is displayed.
The following table describes the channel information and the timer options:
Step 5 Click the green button (Save) to save your timer settings.
Note You can set a maximum of 50 timer profiles.
The following is an example of a reminder that appears on-screen:
Press OK to close the reminder window and tune to the specified channel. Otherwise, press Exit to close
the reminder window.
Channel/Timer Information Description
Channel Number Number of the selected channel.
Channel Name Name of the selected channel.
Event Name Name of the selected program.
Day Day of the week the program will be on the selected channel.
Start Time Start time of the selected program.
Frequency Set the frequency of the reminder: Once, Daily, Weekly, or
Weekdays.
Seconds left
before the
program
starts

Cisco D9865 Specifications

General

Brand	Cisco
Model	D9865
Category	Receiver
Language	English