Cisco ME 3600X

2-79
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter 2 Cisco ME 3800X and ME 3600X Switch Cisco IOS Commands
ethernet y1731 loss
Examples This example shows how configure an MEP for synthetic loss measurement.
Switch# enable
Switch# configure terminal
Switch(config)# ip sla 1
Switch(config-ip-sla)# ethernet y1731 loss SLM domain r3 vlan 10 mpid 3 cos 1 source mpid
1
Switch(config-sla-y1731-loss)#
Related Commands Command Description
monitor loss counters Enables COS-level monitoring.
no ip sla Deletes an existing configuration for an IP SLAs operation.