Chapter
rmon collection stats
-1
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
2]
rmon collection stats
To collect Ethernet group statistics, which include usage statistics about broadcast and multicast packets,
and error statistics about cyclic redundancy check (CRC) alignment errors and collisions, use the rmon
collection stats command in interface configuration mode. To return to the default setting, use the no
form of this command.
rmon collection stats index [owner name]
no rmon collection stats index [owner name]
Syntax Description
Defaults The RMON statistics collection is disabled.
Command Modes Interface configuration
Command History
Usage Guidelines The RMON statistics collection command is based on hardware counters.
Examples This example shows how to collect RMON statistics for the owner root:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# rmon collection stats 2 owner root
Related Commands
index Remote Network Monitoring (RMON) collection control index. The range is
1 to 65535.
owner name (Optional) Owner of the RMON collection.
Release Modification
12.2(52)EY This command was introduced.
Command Description
show rmon statistics Displays RMON statistics.
To Next Page
Loading...
Need help?
General