B-11
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Appendix B Cisco ME 3800X and ME 3600X Switch Debug Commands
debug mac-notification
debug mac-notification
To enable debugging of MAC notification events, use the debug mac-notification command in
privileged EXEC mode. To disable debugging, use the no form of this command.
debug mac-notification
no debug mac-notification
Syntax Description This command has no arguments or keywords.
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines The undebug mac-notification command is the same as the no debug mac-notification command.
Related Commands
Release Modification
12.2(52)EY This command was introduced.
Command Description
show debugging Displays information about the types of debugging that are enabled.
show mac
address-table
notification
Displays the MAC address notification information for all interfaces or the
specified interface.
To Next Page
Loading...
Need help?
General