Cisco ME 3600X User Manual

B-2
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Appendix B Cisco ME 3800X and ME 3600X Switch Debug Commands
debug bridge-domain
debug bridge-domain
To enable debugging of bridge domains, use the debug bridge-domain command in privileged EXEC
mode. To disable debugging, use the no form of this command.
debug bridge-domain {number mac {security | table} {errors | events} | configuration | errors |
ipc}
no debug bridge-domain {number mac {security | table} {errors | events} | configuration |
errors | ipc}
Syntax Description
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines The undebug bridge-domain command is the same as the no debug bridge-domain command.
Related Commands
number Enter the bridge domain number to debug. The range is 1 to 8000.
mac security Displays MAC security debug messages.
mac table Displays MAC address table debug messages.
errors Displays MAC security or MAC address table error debug messages.
events Displays MAC security or MAC address table event debug messages.
configuration Displays bridge domain configuration event debug messages.
errors Displays bridge domain error debug messages.
ipc Displays bridge domain IPC error and event debug messages.
Release Modification
12.2(52)EY This command was introduced.
Command Description
show debugging Displays information about the types of debugging that are enabled.

Cisco ME 3600X Specifications

General

Brand	Cisco
Model	ME 3600X
Category	Switch
Language	English