Cisco ME 3600X

B-7
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Appendix B Cisco ME 3800X and ME 3600X Switch Debug Commands
debug ip igmp filter
debug ip igmp filter
To enable debugging of Internet Group Management Protocol (IGMP) filter events, use the debug ip
igmp filter command in privileged EXEC mode. To disable debugging, use the no form of this
command.
debug ip igmp filter
no debug ip igmp filter
Syntax Description This command has no arguments or keywords.
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines The undebug ip igmp filter command is the same as the no debug ip igmp filter command.
Related Commands
Release Modification
12.2(52)EY This command was introduced.
Command Description
show debugging Displays information about the types of debugging that are enabled.