A-21
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Appendix A Cisco ME 3800X and ME 3600X Switch Boot Loader Commands
ping
ping
To send ICMP ECHO REQUEST packets to a network host, use the ping command in boot loader mode.
ping ip-address
Syntax Description
Command Modes Boot loader
Command History
Examples This example shows how to send an echo request packet to a network host:
Switch: ping 1.1.1.1 255.255.255.0
ip-address The IP address of the network host.
Release Modification
12.2(52)EY This command was introduced.
To Next Page
Loading...
Need help?
General