Cisco ME 3600X User Manual

B-20
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Appendix B Cisco ME 3800X and ME 3600X Switch Debug Commands
debug qos
debug qos
To enable debugging of the quality of service (QoS) feature, use the debug qos command in privileged
EXEC mode. To disable debugging, use the no form of this command.
debug qos {capability | events | service-policy {global-lock | iteration | lifecycle | polling | stats
trace} | set}
no debug qos {capability | events | service-policy {global-lock | iteration | lifecycle | polling |
stats trace} | set}
Syntax Description
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines The undebug qos command is the same as the no debug qos command.
Related Commands
capability Displays all QoS capability debug messages.
events Displays modular QoS command-line interface (MQC) event debug messages.
service-policy Displays QoS service policy debug messages.
global-lock Displays QoS service policy lock event debug messages.
iteration Displays QoS service policy iteration debug messages.
lifecycle Displays QoS service policy install and remove event debug messages.
polling Displays QoS service policy statistics polling debug messages.
stats Displays QoS service policy statistics update debug messages.
trace Includes traceback information in the debug message output.
set Displays QoS packet marking debug messages.
Release Modification
12.2(52)EY This command was introduced.
Command Description
show debugging Displays information about the types of debugging that are enabled.

Cisco ME 3600X Specifications

General

Brand	Cisco
Model	ME 3600X
Category	Switch
Language	English