-107
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter
show mac address-table aging-time
show mac address-table aging-time
To display the aging time of a specific address table instance, or all address table instances on a specified
VLAN or bridge domain or on all VLANs and bridge domains, use the show mac address-table
aging-time command in user EXEC mode.
show mac address-table aging-time [bridge-domain number] [routed-mac] [vlan vlan-id] [ |
{begin | exclude | include} expression]
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines If no VLAN number is specified, the aging time for all VLANs appears.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show mac address-table aging-time command:
Switch> show mac address-table aging-time
Global Aging Time: 300
Vlan Aging Time
---- ----------
This is an example of output from the show mac address-table aging-time vlan 10 command:
Switch> show mac address-table aging-time vlan 10
Vlan Aging Time
---- ----------
10 300
bridge-domain number (Optional) Displays aging time for the specified Ethernet Flow Point (EFP)
bridge domain. The range is from 1 to 8000.
routed-mac (Optional) Displays aging time for routed MAC addresses.
vlan vlan-id (Optional) Displays aging time information for a specific VLAN. The range
is 1 to 4094.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(52)EY This command was introduced.
To Next Page
Loading...
Need help?
General