Cisco ME 3600X User Manual

-64
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter
show interfaces
show interfaces
To display the administrative and operational status of all interfaces or a specified interface, use the show
interfaces command in privileged EXEC mode.
show interfaces [interface-id | vlan vlan-id] [accounting | capabilities [module number] |
counters | dampening | debounce [module] | description | etherchannel | flowcontrol | rep |
stats | status [err-disabled] | switchport [backup | module number] | transceivers
[properties | detail] [module number] | trunk] [ | {begin | exclude | include} expression]
Syntax Description interface-id (Optional) Valid interfaces include physical ports (including type, module, and
port number) and port channels. The port-channel range is 1 to 48.
vlan vlan-id (Optional) VLAN identification. The range is 1 to 4094.
accounting (Optional) Displays accounting information on the interface, including active
protocols and input and output packets and octets.
capabilities (Optional) Displays the capabilities of all interfaces or the specified interface,
including the features and options that you can configure on the interface. Though
visible in the command line help, this option is not available for VLAN IDs.
module number (Optional) Displays capabilities, switchport configuration, or transceiver
characteristics (depending on preceding keyword) of all interfaces on the switch.
The only valid module number is 1. This option is not available if you have entered
a specific interface ID.
counters
(Optional) See the show interfaces counters command.
dampening (Optional) Displays interface dampening information.
debounce
[module]
(Optional) Displays interface debounce time information.
description (Optional) Displays the administrative status and description set for an interface.
etherchannel (Optional) Displays interface EtherChannel information.
fcpa (Optional) Displays fiber channel information
flowcontrol (Optional) Displays interface flowcontrol information
mpls-exp (Optional) Display interface MPLS experimental accounting information.
rep (Optional) See the show interfaces rep command.
stats (Optional) Displays the input and output packets by switching path for the
interface.
status (Optional) Displays the status of the interface. A status of unsupported in the Type
field means that a non-Cisco small form-factor pluggable (SFP) module is inserted
in the module slot.
err-disabled (Optional) Displays interfaces in error-disabled state.
switchport (Optional) Displays the administrative and operational status of a switching
(nonrouting) port, including port blocking and port protection settings.
backup (Optional) Displays the backup interface configuration.
module (Optional) Limits the display to interfaces on a module
transceivers (Optional) See the show interfaces transceiver command.
trunk Displays interface trunk information. If you do not specify an interface, only
information for active trunking ports appears.

Cisco ME 3600X Specifications

General

Brand	Cisco
Model	ME 3600X
Category	Switch
Language	English