EasyManuals Logo

Cisco ME 3600X User Manual

Cisco ME 3600X
628 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #82 background imageLoading...
Page #82 background image
2-58
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter 2 Cisco ME 3800X and ME 3600X Switch Cisco IOS Commands
diagnostic schedule test
diagnostic schedule test
To configure the diagnostic test schedule, use the diagnostic schedule test command in global configuration
mode. to remove the schedule, use the no form of this command.
diagnostic schedule test {name | test-id | test-id-range | all | basic} {daily hh:mm | on mm dd yyyy
hh:mm | weekly day-of-week hh:mm}
no diagnostic schedule test {name | test-id | test-id-range | all | basic} {daily hh:mm |
on mm dd yyyy hh:mm | weekly day-of-week hh:mm}
Syntax Description
Defaults This command has no default settings.
Command Modes Global configuration
Command History
name Specifies the name of the test. To display the test names in the test-ID list, enter
the show diagnostic content privileged EXEC command.
test-id Specifies the ID number of the test. The range is from 1 to 6. To display the test
numbers in the test-ID list, enter the show diagnostic content privileged EXEC
command.
test-id-range Specifies more than one test with the range of test ID numbers. Enter the range
as integers separated by a comma and a hyphen (for example, 1,3-6 specifies
test IDs 1, 3, 4, 5, and 6). To display the test numbers in the test-ID list, enter
the show diagnostic
content privileged EXEC command.
all Specifies all of the diagnostic tests.
basic Specifies the basic on-demand diagnostic tests.
daily hh:mm Specifies the daily scheduling of the diagnostic tests.
hh:mm—Enter the time as a 2-digit number (for a 24-hour clock) for
hours:minutes; the colon (:) is required, such as 12:30.
on mm dd yyyy
hh:mm
Specifies the scheduling of the diagnostic tests on a specific day and time.
For mm dd yyyy:
• mm—Spell out the month, such as January, February, and so on, with
upper-case or lower-case characters.
• dd—Enter the day as a 2-digit number, such as 03 or 16.
• yyyy—Enter the year as a 4-digit number, such as 2008.
weekly day-of-week
hh:mm
Specifies the weekly scheduling of the diagnostic tests.
day-of-week—Spell out the day of the week, such as Monday, Tuesday, and so
on, with upper-case or lower-case characters.
Release Modification
12.2(52)EY This command was introduced.

Table of Contents

Other manuals for Cisco ME 3600X

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ME 3600X and is the answer not in the manual?

Cisco ME 3600X Specifications

General IconGeneral
BrandCisco
ModelME 3600X
CategorySwitch
LanguageEnglish

Related product manuals