Cisco ME 3600X User Manual

B-39
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Appendix B Cisco ME 3800X and ME 3600X Switch Debug Commands
debug xconnect
debug xconnect
to enable debugging of the xconnect virtual connection or virtual connection infrastructure (VFI), use
the debug xconnect command in privileged EXEC mode. To disable debugging, use the no form of this
command.
debug xconnect {error | event}
no debug xconnect {error | event}
Syntax Description
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines The undebug xconnect command is the same as the no debug xconnect command.
Related Commands
error Displays debug messages for xconnect authorization errors.
events Displays debug messages for xconnect authorization events.
Release Modification
12.2(52)EY This command was introduced.
Command Description
show debugging Displays information about the types of debugging that are enabled.
xconnect Enable xconnect on an interface.

Cisco ME 3600X Specifications

General

Brand	Cisco
Model	ME 3600X
Category	Switch
Language	English