B-37
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Appendix B Cisco ME 3800X and ME 3600X Switch Debug Commands
debug vfi
debug vfi
To enable debugging of the virtual forwarding infrastructure (VFI) feature, use the debug vfi command
in privileged EXEC mode. To disable debugging, use the no form of this command.
debug vfi [fsm] {error | event}
no debug vfi [fsm] {error | event}
Syntax Description
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines The undebug vfi command is the same as the no debug vfi command.
Related Commands
fsm (Optional) Displays VFI finite state-machine debug messages.
error Displays debug messages for VFI errors or VFI finite state-machine errors.
events Displays debug messages for VFI events or VFI finite state-machine events as they
occur.
Release Modification
12.2(52)EY This command was introduced.
Command Description
show debugging Displays information about the types of debugging that are enabled.
show vfi Displays VFI status for the switch.
To Next Page
Loading...
Need help?
General