Cisco ME 3600X User Manual

2-22
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter 2 Cisco ME 3800X and ME 3600X Switch Cisco IOS Commands
boot helper-config-file
boot helper-config-file
To specify the name of the configuration file to be used by the Cisco IOS helper image, use the boot
helper-config-file command in global configuration mode. If this is not set, the file specified by the
CONFIG_FILE environment variable is used by all versions of Cisco IOS that are loaded. To return to
the default setting, use the no form of this command.
boot helper-config-file filename
no boot helper-config file
Syntax Description
Defaults No helper configuration file is specified.
Command Modes Global configuration
Command History
Usage Guidelines This variable is used only for internal development and testing.
Filenames and directory names are case sensitive.
This command changes the setting of the HELPER_CONFIG_FILE environment variable. For more
information, see Appendix A, “Cisco ME 3800X and ME 3600X Switch Boot Loader Commands.”
Related Commands
file-name The helper configuration file to load.
Release Modification
12.2(52)EY This command was introduced.
Command Description
show boot Displays the settings of the boot environment variables.

Cisco ME 3600X Specifications

General

Brand	Cisco
Model	ME 3600X
Category	Switch
Language	English