Cisco ME 3600X User Manual

B-14
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Appendix B Cisco ME 3800X and ME 3600X Switch Debug Commands
debug network-clock
debug network-clock
To enable debugging of a SyncE network clock, use the debug network-clock command in Privileged
EXEC mode. To disable debugging, use the no form of this command.
debug network-clock [error] [event] [pal] [sm]
no debug network-clock [error] [event] [pal] [sm]
Syntax Description
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines
Examples The following example shows how to enable SyncE network clock debugging:
Switch# deb network-clock ?
error Network clock error debugging
event Network clock event debugging
pal Network clock PAL debugging
sm Network clock state machine debugging
Switch# deb network-clock error
Related Commands
error Network clock error debugging
event Network clock event debugging
pal Network clock PAL debugging
sm Network clock state machine debugging
Release Modification
15.1(2)EY This command was introduced.
Command Description
show debugging Displays information about the types of debugging that are enabled.

Cisco ME 3600X Specifications

General

Brand	Cisco
Model	ME 3600X
Category	Switch
Language	English