Cisco ME 3600X

A-16
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Appendix A Cisco ME 3800X and ME 3600X Switch Boot Loader Commands
mgmt_init
mgmt_init
To initialize the Ethernet management port, use the mgmt_init command in boot loader mode.
mgmt_init
Syntax Description This command has no arguments or keywords.
Command Modes Boot loader
Command History
Usage Guidelines Use the mgmt_init command only during debugging of the Ethernet management port.
Examples This example shows how to initialize the Ethernet management port:
Switch: mgmt_init
Release Modification
12.2(52)EY This command was introduced.