Cisco ME 3600X User Manual

2-23
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter 2 Cisco ME 3800X and ME 3600X Switch Cisco IOS Commands
boot manual
boot manual
To enable manually booting the switch during the next boot cycle, use the boot manual command in
global configuration mode. To return to the default setting, use the no form of this command.
boot manual
no boot manual
Syntax Description This command has no arguments or keywords.
Defaults Manual booting is disabled.
Command Modes Global configuration
Command History
Usage Guidelines The next time you reboot the system, the switch is in boot loader mode, which is shown by the switch:
prompt. To boot the system, use the boot boot loader command, and specify the name of the bootable
image.
This command changes the setting of the MANUAL_BOOT environment variable. For more
information, see Appendix A, “Cisco ME 3800X and ME 3600X Switch Boot Loader Commands.”
Related Commands
Release Modification
12.2(52)EY This command was introduced.
Command Description
show boot Displays the settings of the boot environment variables.

Cisco ME 3600X Specifications

General

Brand	Cisco
Model	ME 3600X
Category	Switch
Language	English