B-38
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Appendix B Cisco ME 3800X and ME 3600X Switch Debug Commands
debug vrrp
debug vrrp
To enable debugging of the Virtual Router Redundancy Protocol (VRRP), use the debug vrrp command
in privileged EXEC mode. To disable debugging, use the no form of this command.
debug vrrp {all | errors | events | packets | process | registry | state | timer | track}
no debug vrrp {all | errors | events | packets | process | registry | state | timer | track}
Syntax Description
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines The undebug vrrp command is the same as the no debug vrrp command.
Related Commands
all Displays all VRRP debug messages.
errors Displays debug messages for VRRP error reporting.
events Displays debug messages for protocol and interface events.
packets Displays debug messages. for VRRP packet details.
process Displays debug messages for VRRP process activities.
registry Displays debug messages for VRRP registry reporting.
state Displays VRRP state change debug messages;
timer Displays debug messages for VRRP timer reporting.
track Displays debug messages VRRP monitor tracking.
Release Modification
12.2(52)EY This command was introduced.
Command Description
show debugging Displays information about the types of debugging that are enabled.
To Next Page
Loading...
Need help?
General