Cisco ME 3600X User Manual

B-24
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Appendix B Cisco ME 3800X and ME 3600X Switch Debug Commands
debug spanning-tree bpdu-opt
debug spanning-tree bpdu-opt
To enable debugging of optimized spanning-tree bridge protocol data units (BPDUs) handling, use the
debug spanning-tree bpdu-opt command in privileged EXEC mode. To disable debugging, use the no
form of this command.
debug spanning-tree bpdu-opt [detail | packet]
no debug spanning-tree bpdu-opt [detail | packet]
Syntax Description
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines The undebug spanning-tree bpdu-opt command is the same as the no debug spanning-tree bpdu-opt
command.
Related Commands
detail (Optional) Displays detailed optimized BPDU-handling debug messages.
packet (Optional) Displays packet-level optimized BPDU-handling debug messages.
Release Modification
12.2(52)EY This command was introduced.
Command Description
show debugging Displays information about the types of debugging that are enabled.
show spanning-tree Displays spanning-tree state information.

Cisco ME 3600X Specifications

General

Brand	Cisco
Model	ME 3600X
Category	Switch
Language	English