Cisco ME 3600X User Manual

-2
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter
shutdown vlan
shutdown vlan
To shut down (suspend) local traffic on the specified VLAN, use the shutdown vlan command in global
configuration mode. To restart local traffic on the VLAN, use the no form of this command.
shutdown vlan vlan-id
no shutdown vlan vlan-id
Syntax Description
Defaults No default is defined.
Command Modes Global configuration
Command History
Usage Guidelines Use the shutdown VLAN configuration command to shut down local traffic on any VLAN, including
extended-range VLANs (1006-4094).
You can verify your setting by entering the show vlan privileged EXEC command.
Examples This example shows how to shut down traffic on VLAN 2:
Switch(config)# shutdown vlan 2
Related Commands
vlan-id ID of the VLAN to be locally shut down. The range is 2 to 1001. VLANs defined as
default VLANs (1 and 1002 to 1005), as well as extended-range VLANs (greater
than 1005) cannot be shut down.
Release Modification
12.2(52)EY This command was introduced.
Command Description
shutdown (VLAN
configuration)
Shuts down local traffic on the VLAN when in VLAN configuration mode
(accessed by the vlan vlan-id global configuration command).

Cisco ME 3600X Specifications

General

Brand	Cisco
Model	ME 3600X
Category	Switch
Language	English