Cisco ME 3600X

B-8
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Appendix B Cisco ME 3800X and ME 3600X Switch Debug Commands
debug ip igmp max-groups
debug ip igmp max-groups
To enable debugging of Internet Group Management Protocol (IGMP) maximum groups events, use the
debug ip igmp max-groups command in privileged EXEC mode. To disable debugging, use the no form
of this command.
debug ip igmp max-groups
no debug ip igmp max-groups
Syntax Description This command has no arguments or keywords.
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines The undebug ip igmp max-groups command is the same as the no debug ip igmp max-groups
command.
Related Commands
Release Modification
12.2(52)EY This command was introduced.
Command Description
show debugging Displays information about the types of debugging that are enabled.