-58
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter
show etherchannel
show etherchannel
To display EtherChannel information for a channel, use the show etherchannel command in user EXEC
mode.
show etherchannel [channel-group-number {detail | port | port-channel | protocol | summary}]
{detail | load-balance | port | port-channel | protocol | summary} [ | {begin | exclude |
include} expression]
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines If you do not specify a channel-group, all channel groups are displayed.
In the output, the Passive port list field is displayed only for Layer 3 port channels. This field means that
the physical port, which is still not up, is configured to be in the channel group (and indirectly is in the
only port channel in the channel group).
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
channel-group-number (Optional) Number of the channel group. The range is 1 to 26.
detail Displays detailed EtherChannel information.
load-balance Displays the load-balance or frame-distribution scheme among ports in the
port channel.
port Displays EtherChannel port information.
port-channel Displays port-channel information.
protocol Displays the protocol that is being used in the EtherChannel.
summary Displays a one-line summary per channel-group.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(52)EY This command was introduced.
To Next Page
Loading...
Need help?
General