-124
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter
show mac address-table vlan
show mac address-table vlan
To display the MAC address table information for the specified VLAN, use the show mac address-table
vlan command in user EXEC mode.
show mac address-table vlan vlan-id [ | {begin | exclude | include} expression]
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show mac address-table vlan 1 command:
Switch> show mac address-table vlan 1
Mac Address Table
------------------------------------------
Vlan Mac Address Type Ports
---- ----------- ---- -----
1 0100.0ccc.cccc STATIC CPU
1 0180.c200.0000 STATIC CPU
1 0100.0ccc.cccd STATIC CPU
1 0180.c200.0001 STATIC CPU
1 0180.c200.0002 STATIC CPU
1 0180.c200.0003 STATIC CPU
1 0180.c200.0005 STATIC CPU
1 0180.c200.0006 STATIC CPU
1 0180.c200.0007 STATIC CPU
Total Mac Addresses for this criterion: 9
vlan-id (Optional) Displays addresses for a specific VLAN. The range is 1 to 4094.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(52)EY This command was introduced.
To Next Page
Loading...
Need help?
General